DSP-4 Digital Signal Processing

90.00 incl btw

2e hands

1 op voorraad

Artikelnummer: xvdsp4qsc Categorieën: , Tag:

Beschrijving

DSP-4 Digital Signal Processing

DSP-4

Digital Signal Processing

The DSP-3 and DSP-4 are compact, 2-channel signal processing modules that can plug into the back of most DataPort-equipped QSC amps to conserve rack space and simplify interconnection. They can also be mounted into a DPX-4 remote rack mounting bracket for use as a standalone, rack-mounted processing unit.

Hardware

  • Two independent channels of DSP
  • 48kHz, 24-bit converters
  • No turn on pops or zipper noise
  • If the memory or hardware fails, unit turns on muted to prevent driver damage
  • Host interface via RS-232 or QSControl Audio Network System via CM16a Amplifier Network Monitor
  • Electronically balanced XLR inputs
  • Contact closure to trigger preset changes
  • Post-DSP output signal for daisy-chaining
  • Peak and RMS meter displays with clip indication
  • DataPort pass-through compatible with QSControl
  • Selectable input sensitivity: 1.5, 4, 9, 18 Vrms;

6, 14.5, 21.5, 27.5 dBu; 3.5, 12, 19, 25 dBV

  • Output signal gain (to be released)

Software

  • “Drag-and-drop” configuration software
  • DSP processing power and memory is dynamically assigned to signal processing functions – eliminating the limitations imposed by fixed signal chain designs
  • Graphical representation of DSP resources
  • Firmware upgrades via RS-232
  • Hard copy printout of signal flow layout or parameter settings

System Requirements

  • Windows® 98, NT4 (SP6), and 2000 (SP1)+
  • SVGA monitor @ 800 x 600 (min.); 1024 x 768 recommended
  • CD-ROM drive
  • 32 MB RAM (min.)
  • 10 MB free hard disk space (min.)
  • Available RS-232 COM port
  • Male-to-female 9-pin serial cable (for programming)

+ Windows ME not supported

DSP-4 FUNCTIONS Multiple Parametric Filters, assignable anywhere in the signal chain:Variable Frequency
Variable Gain
Variable Q
Bypass (one EQ Band)
Bypass all EQs
Add EQ
Delete EQ
Show Response Multiple Delays, assignable anywhere in the signal chain910 msec Maximum
20.83 μsec Incremental Dynamics processor with Compressor assignable anywhere in the signal chain: Gain
Threshold
Ratio
Attack Time
Release Time
Show Response
Bypass Output Peak Limiter, assignable anywhere in the signal chain:Gain
Threshold
Attack Time
Release Time
Show Response
Bypass High and Low-Pass Crossover Filters, assignable anywhere in the signal chain:Butterworth 6, 12, 18, 24 dB per octave slope
Bessel 6, 12, 18, 24 dB per octave slope
Linkwitz-Riley 12 and 24 dB per octave slope
Bypass (one EQ Band)
Bypass all EQs
Add EQ
Delete EQ
Show Response High and Low-Pass Shelf Filters, assignable anywhere in the signal chain:
Variable Corner Frequency
Variable Gain
Variable Q
Bypass (one EQ Band)
Bypass all EQs
Add EQ
Delete EQ
Show Response

Extra informatie

Gewicht1 kg